After following the suggested updates, I have the same problem as the others who have posted before -- the webcamera page can detect the camera correctly (Intel MIPI Camera (V4L2)), but no video is shown and the webpage reported "During testing, there were errors due to which it is impossible to determine some parameters of your web camera" Here are some details about my computer, I am using X1 carbon G13, but I think the camera is the same: "Linux X1 6.15.5-200.fc42.x86_64 #1 SMP PREEMPT_DYNAMIC Sun Jul 6 09:16:17 UTC 2025 x86_64 GNU/Linux"
cam -l [0:02:46.933415200] [5407] INFO Camera camera_manager.cpp:327 libcamera v0.4.0 [0:02:46.953763883] [5410] INFO SimplePipeline simple.cpp:1581 No sensor found for /dev/media0 Available cameras:
dmesg | grep ipu6 Place your right index finger on the fingerprint reader [ 5.115125] intel-ipu6 0000:00:05.0: enabling device (0000 -> 0002) [ 5.148558] intel-ipu6 0000:00:05.0: Found supported sensor OVTI08F4:00 [ 5.148597] intel-ipu6 0000:00:05.0: Connected 1 cameras [ 5.155463] intel-ipu6 0000:00:05.0: Sending BOOT_LOAD to CSE [ 5.193171] intel-ipu6 0000:00:05.0: Sending AUTHENTICATE_RUN to CSE [ 5.265448] intel-ipu6 0000:00:05.0: CSE authenticate_run done [ 5.265458] intel-ipu6 0000:00:05.0: IPU6-v4[7d19] hardware version 6 [ 5.499102] intel_ipu6_psys.psys intel_ipu6.psys.40: pkg_dir entry count:8 [ 5.499677] intel_ipu6_psys.psys intel_ipu6.psys.40: psys probe minor: 0
Re: X1 12th
After following the suggested updates, I have the same problem as the others who have posted before -- the webcamera page can detect the camera correctly (Intel MIPI Camera (V4L2)), but no video is shown and the webpage reported "During testing, there were errors due to which it is impossible to determine some parameters of your web camera" Here are some details about my computer, I am using X1 carbon G13, but I think the camera is the same:
"Linux X1 6.15.5-200.fc42.x86_64 #1 SMP PREEMPT_DYNAMIC Sun Jul 6 09:16:17 UTC 2025 x86_64 GNU/Linux"
cam -l
[0:02:46.933415200] [5407] INFO Camera camera_manager.cpp:327 libcamera v0.4.0
[0:02:46.953763883] [5410] INFO SimplePipeline simple.cpp:1581 No sensor found for /dev/media0
Available cameras:
dmesg | grep ipu6
Place your right index finger on the fingerprint reader
[ 5.115125] intel-ipu6 0000:00:05.0: enabling device (0000 -> 0002)
[ 5.148558] intel-ipu6 0000:00:05.0: Found supported sensor OVTI08F4:00
[ 5.148597] intel-ipu6 0000:00:05.0: Connected 1 cameras
[ 5.155463] intel-ipu6 0000:00:05.0: Sending BOOT_LOAD to CSE
[ 5.193171] intel-ipu6 0000:00:05.0: Sending AUTHENTICATE_RUN to CSE
[ 5.265448] intel-ipu6 0000:00:05.0: CSE authenticate_run done
[ 5.265458] intel-ipu6 0000:00:05.0: IPU6-v4[7d19] hardware version 6
[ 5.499102] intel_ipu6_psys.psys intel_ipu6.psys.40: pkg_dir entry count:8
[ 5.499677] intel_ipu6_psys.psys intel_ipu6.psys.40: psys probe minor: 0
Many thanks for your suggestions